How To Build Spartan Olympus
How To Build Spartan Olympus. Easy to follow tutorial on how to build your own Spartan Race style Olympus obstacle. Complete parts list below. Don't forget to SUBSCRIBE!!
DISCLAIMER: Failure to heed the safety warnings in this video may lead to serious injury. Build, construct, and/or use at your own risk. Follow the safety warnings in the video. After assembling and standing up Olympus, make sure all connections, bolts, and nuts are fully tightened. Make sure all connections are completely tightened before each use.
PARTS (for one wall face):
WOOD
(1) 8x4' x 5/8" thick sheets of plywood for the wall face
(7) 8' 2x4's
HARDWARE
(4) 4" long 3/8" diameter hex bolts
(2) 7" long 3/8" diameter hex bolts (if you make 3 wall faces)
(10) 3/8" x 1" wide washers for the long hex bolts
(2) 3/8" x 1.5" fender washers for the chains
(2) 2" long 3/8" diameter botls for the chains
(2) 10 link lengths of 2" chains
(8) 3/8" hex nuts
(1) 1QT can Krylon ColorMax acrylic latex paint
(1) box 5lb, 3-1/2" Grip RIte exterior deck screws
(1) set of climbing holds - https://amzn.to/3lisFiS
RECOMMENDED TOOLS
Drill - https://amzn.to/2Yswqbm
Screw gun - https://amzn.to/3aSyyOF
Quick sqaure - https://amzn.to/3gqDviM
Carpenter square - https://amzn.to/31tS0hX
3" hole saw - https://amzn.to/32iTdaQ
QUICK-GRIP Bar Clamp - https://amzn.to/3j7V5dl
Level
Adjustable pliers
1/8" size drill bit for pilot holes
5/8" diameter drill bit for climbing holds and chains
Tape measure
Circular saw
Saw horses
Eye protection
1/2" diameter wood boring bit
9/16" diameter socket
Socket wrench
Pencil
Ladder
Paint pan
Paint brush
Paint roller
